Iolite Vaporizer Overall Satisfaction.

The iolite portable vaporizer is a very impressive unit due to it’s ability to solve the traditional restrictions of cords and batteries. The pocket size construction and travel case aid to the overall effectiveness of this unit.

I would highly recommend the iolite vape to anyone who is looking for an efficient portable vaporizer at a competitive price.

Iolite Vaporizer Troubleshooting

Like every device, Iolite vaporizer also has some issues. Iolite vape issues are usually related to venting and ignition of the unit. If your iolite vaporizer does not ignite or if you filled the Iolite unit with butane but the flow is not consistent, you can use these steps below for Iolite vape troubleshooting:

Iolite Troubleshooting: Venting & Refilling


If you are experiencing any problems with your iolite portable vaporiser please follow the following steps. If you still have problems please contact the store you bought it from or our iolite expert. 

Venting the iolite vaporizer.

  1. Make sure the unit is off, the switch should be at 0. Turn the unit upside down and point away from your body.
  2. Using the small end of the handtool, depress the gas valve and let all the gas dispel ensuring to keep hands clear of liquid gas spraying from the valve, this may take up to or more than 30 seconds.
  3. Refill using a recommended butane* and leave for 5 minutes. It should only take a few seconds to fill (2 to 5 seconds). As soon as gas sprays back it is full.
  4. Turn on the unit, the switch should be at 1, and listen for a hissing sound.
  5. If you hear the gas flow, press the igniter, you may need to try 2 or 3 times before it will light.


Refilling the iolite with Butane

  1. Hold the iolite in one hand with the gas valve at the top
  2. With your other hand hold the butane can upside down
  3. Position the butane can perpendicular to the filling valve
  4. Press down gently but firmly
  5. Filling should take between 2 and 5 seconds, as soon as it sprays back the iolite is full.
  6. Leave the iolite for at least 5 minutes before attempting ignition.